• Model NO.：GD61034
• Foundation Fixed：Fixture Unit
• Light Source Power：DC12V, 100W
• Light Source Focus Angle：48˚ - 4.5˚
• Light Source Focus Intensity：1:20
• Photo Cell Cell Type：Selenium Cell
• Power：AC220V, 60Hz
• Torque：Normal 300kg.F.Cm, Max 480 Kf.F.Cm
• Wind Velocity：≤ 15m,Sec
• Control Rack Dimension：(W) 730 X (D) 650 X (H) 1, 400
• Transport Package：Plywood Case
• Trademark：GOLD
• Origin：Chongqing China(Mainland)
• HS Code：9031809090
• Production Capacity：100 Sets, Year

IEC 61034 - 1 & 2Measurement of smoke density of cables burning under a defined condition- part 1 Test apparatus- part 2 Test procedure and requirementsBS 6853

Code of practice for fire precautions in the design and construction of passenger carrying trains

 

 

Feature:

- Chamber internal area is 3000mm±30mm and it's structured as Cubic Enclosure with appropriate

fixed iron frame angle.

- It's configured with a door with test glass windows and in both faces of the opposite side, there's a

sealed transparent window (minimum 100mmX100mm) with a horizontal light measure system that

allows light penetration.

- Designed to prevent direct sunlight exposure and severe weather change in Enclosure.

- Photocell and Light Source are located in the middle part of both windows of the wall

surface in the opposite side to avoid physical contact.

- A lamp to provide regular light is installed.

- Two types of auto Filter system (Carrusel) are installed to automatically calibrate the transmissivity of light.

- The reduction of light by smoke is measured using Photocell.

- In order to verify accordingly the intensity of radiation to measure light change by self-emission,

the equipment has been designed to fit various kind of filter in the Light Source.   

- A support system to allow separate fitting of Light Source and Photocell in the outer wall.

-The Light Source is a halogen lamp with a clean crystal lamp and tungsten filament.

- Average power : 100W, Average voltage: DC12v, Average velocity of light : 2000 lm~3000 lm,

 and Average colour temperature: 2800K~3200K.

- The Receptor Photocell is selenium or silicone type and has a spectrum reaction conform to 

Photopic Observer (similar to a human eye) of the International Commission on Illumination (CIE).

- A heating system is installed within the cube to swiftly match the standard temperature 

(25ºC±5ºC) in the initial test.

- We seek tester's safety and convenience through an Auto ignition system.

Test Result:

- Flameout time(min)

- Time to max Ao

- Min light transmittance (%)

- Add photo feature of carbonization area

 

Specification:

Product name	IEC 61034 Smoke Density Tester for Cable China Manufacturer
Frame dimension	3,000(W) × 3,000(D) × 3,000(H)
Frame material	Stainless Steel SUS 301
Transparent sealed window	100 × 100 mm
Foundation Fixed	Fixture unit
Light Source Power	DC12V, 100W
Light Source Focus Angle	48 - 4.5(Degree)
Light Source Focus Intensity	1:20
Photo Cell Diameter	Ø45 mm
Photo Cell Cell Type	Selenium Cell
Exhaust Blower Fan Flow	7 m3/min ~ 15 m3/min
Exhaust Blower Size	246(W) x 220(D) x 205(H) mm
Exhaust Blower Material	Stainless Steel (Inner Fan)
Exhaust Blower Power	AC220V, 60Hz, φ1, 210W
Exhaust Blower Flow Rate(max)	8.0m2/min
Control Rack Dimension	(W) 730 X (D) 650 X (H) 1,400