Model | YTH-080 | YTH-150 | YTH-225 | YTH-408 | YTH-800 | YTH-1000 |
Inner chamber size w×h×d(cm) | 40×50×40 | 50×60×50 | 50×75×60 | 60×85×80 | 100×100×80 | 100×100×100 |
Exterior chamber size w×h×d(cm) | 90×140×95 | 100×150×105 | 100×165×115 | 110×175×135 | 150×190×135 | 150×190×155 |
Testing temperature range | -73ºC ,-60ºC,-40ºC,-20ºC,0ºC~150ºC,180ºC |
Testing humidity range | 20%RH~98%RH(10%RH~98%RH Or 5%RH~98%RH) |
Performance | Temp.humi.fluctuation | ±0.2ºC,±0.5%RH |
Temp.humi.uniformity | ±1.5ºC;±2.5%RH(RH≤75%),±4%(RH>75%)empty load,after stabilization |
Temp.humi.resolution | 0.01ºC;0.1%RH |
Heating-up time | ºC | 10 0 15 0 |
min | 30 40 | 30 40 | 30 45 | 30 45 | 30 45 | 30 45 |
Cooling-drow time | ºC | 0 -20 -40 -60 -70 |
min | 25 40 50 70 80 |
Material | Exterior chamber material | Stainless steel+Powder coating |
Interior chamber material | SUS#304 Stainless steel |
Insulation material | PU fiberglass wool |
System | Air circulation system | Cooling fan |
Heating system | SUS#Stainless steel high-speed heater |
Humidification system | Surface evaporation system |
Refrigeration system | Imported tecumseh compressor+fin type evaporator+air(water)cooling system |
|
Dehumidifying system | ADP critical dew point cooling/dehumidifying method |
Controlling system | Digital electronic indicator+SSR+PID |
Other components | Multi-layer vacuum glass observation window,cable port(50mm),controlling status indicator lamp,chamber light,specimenloading shelf(2pcs,position adjustable) |
|
Safety protection device | Over-heat protection circuit breaker,compressor overload protection,control system overload protection,humidifying system overload protection indicator lamp |
|
Power supply | AC 1 phase 220V;3 phase 380V 60/50Hz |
Customization service | Non-standard or special requirements are all welcome |