• Model NO.：GDCR7100D
• Trademark：HV Hipot
• Origin：Wuhan China
• Production Capacity：100000 Sets,Year

Function

AC/DC current measurement, peak current hold, online monitoring

Power

6V DC(LR6 1.5V*4 alkaline dry batteries, continuously working for 12 hours)

Test mode

Clamp CT, non-contact measurement 

Clamp size

108mm*148mm (clamp electric cable of diameter 80mm, or 160mm*4mm flat cable and steel earth wires)

Measurement range

AC: 0.0A~1000A; DC: 0.0A~2000A

Resolution

0.1A  AC/DC

Measurement Accuracy

0.0A-999A:  ±2%±5dgt   

1000A-1499A: ±3%±5dgt

1500A-2000A: ±4%±5dgt

Standard condition

23ºC±3ºC, ≤75%RH, measured wire is at the center of the clamp.

Frequency response

AC: 45Hz~400Hz

Sampling rate

About 2 times/second

Measured wire position

Measured wire at approximately the geometric center of the clamp, max. Off-center error is 2%rdg. 

Display mode

4-bit LCD display, display area 47*28.5mm

Polarity indication

Automatic recognition under DC current detection, displayed with "-".

Range shift

Automatic switching.

Line voltage

Below AC 600V line measurement

Software

Stored data can be uploaded to PC via software.

USB interface

With USB interface, wire 1.5m.

Data storage

Can store 99 groups of data, "FULL" indicates full storage.

Peak hold

Peak capture and peak hold function, press "HOLD" for long to show the peak value.

Data hold

"HOLD" symbol appears.

Overflow

"OL" symbol appears.

Automatic shutdown

Automatically shutdown about 5 minutes after power on to reduce battery consumption

Battery voltage

Low battery symbol "  " appears to remind the replacement of battery when battery voltage drops below 4.6V.

Meter size & weight

350*180*55mm(L*W*H)

Meter: 1.5kg(with battery), package: 2.6kg(with accessories)

Working current

20mA

Environment

Working: -10ºC~40ºC, ≤80%RH; storage: -10ºC~60ºC, ≤70%RH

Insulation strength

AC 3700kV/rms (Between the rear cover screw and the housing)

Safety compliance

IEC1010-1, IEC1010-2-032, class 2 of pollution, CAT III (600V)