• Model NO.：GD-01008
• Control：Manual Control
• Weight：0-100Kg
• Power Source：AC220V
• Oil Cylinder Position：Na
• Item Name：Building Material Microscale Combustion Calorimete
• Application：Determine The Basic Thermo-Chemical Data of Materi
• Applicable Standards：ASTM D7309-2007; BS En 60204-1, BS En 746-2;
• Specimen Size：1-10mg
• Heating Speed：0-2k,S
• Size：1.5m*0.35m*0.65m
• OEM Serive：Yes
• Training：Your Technicals Can Get Free Training in Our Facto
• Installation：We Can Send Our Engineers for Installation
• Warranty：1 Year
• Transport Package：Packed in Veneer Case
• Specification：Refer to detailed description
• Trademark：GOLD
• Origin：Chongqing, China
• HS Code：9031809090
• Production Capacity：10 Sets, Month

Basic Info.

Model NO. GD-01008 Control Manual Control Weight 0-100Kg Power Source AC220V Oil Cylinder Position Na Item Name Building Material Microscale Combustion Calorimete Application Determine The Basic Thermo-Chemical Data of Materi Applicable Standards ASTM D7309-2007; BS En 60204-1, BS En 746-2; Specimen Size 1-10mg Heating Speed 0-2k/S Size 1.5m*0.35m*0.65m OEM Serive Yes Training Your Technicals Can Get Free Training in Our Facto Installation We Can Send Our Engineers for Installation Warranty 1 Year Transport Package Packed in Veneer Case Specification Refer to detailed description Trademark GOLD Origin Chongqing, China HS Code 9031809090 Production Capacity 10 Sets/ Month

Product Description

GD-01008 Building Material Microscale Combustion Calorimeter BS EN 746-2, ASTM D7309, BS EN 60204-1
 
Introduction:
It can determine the basic thermo-chemical data, such as Specific Heat Release rate, combustion calorific, Ignition Temperature, by testing very little specimen (1-10mg)  in a few seconds, and predict the combustion retardant characteristics of the tested material.
 
Applicable Standards:

1. ASTM D7309-2007;
2. EMC 89/336/EEC;
3. LVD 72/23/EEC;
4. BS EN 60204-1, BS EN 746-2;

Features:

1. Anaerobic and aerobic pyrolysis;
2. Fast test speed, convenient for determine, it can finish the testing within several minutes;
3. High precise MFC(Mass Flow Controller) to control O2 and O2 flow: measurement range 20-200cm3/min;Response time less than 0.1S, accuracy: F.S±1%;
4. O2 sensor measurement range:0-100%, T90<6S, ±0.1%, accuracy: F.S±1%;
5. There is temperature sensor under the sample cup; 
6. Automatically remove the sample cup into the combustion furnace; 
7. Combustion furnace: Programmable control the heating temperature to specified temperature, swift of the temperature below 5K/h, with over-temperature protection function;
8. Temperature range: Room temperature-1000ºC; imported heating wire; high performance kanthal A-1 heating element;
9. With multiple cooling devices which is convenient for thermal dissipation;
10. LABVIEW software, PC and printer are optional, the software has following functions:

1. Display the running status of the equipment;
2. Calibrate the equipment and store calibration results;
3. Collect testing data;
4. Calculate heat release rate(W/g), combustion calorific(J/g), Ignition Temperature(°C);

Specifications:

1. Specimen size: 1-10mg, (typical specimen quality is 2-5mg), supply with precise balance with measurement range of 42g, 0.01mg.
2. Size: H:1570*W343*D663mm
3. Specimen heating speed: 0-2K/S
4. N2: 99.5% purity, pressure: 20 - 25 PSI
5. O2: 99.5% purity, pressure: 20 - 25 PSI