How to tighten screws: Hot topics and practical tips on the Internet in the past 10 days
In daily life and industrial production, tightening screws is a common operation that seems simple but contains skills. Recently, discussions on "screw tightening" have become increasingly popular across the Internet, involving multiple dimensions such as tool selection, operating misunderstandings, and industry standards. This article combines hot topics in the past 10 days, presents key information with structured data, and attaches practical guidelines.
1. Statistics of hot topics across the entire network (last 10 days)
| Topic classification | Amount of discussions (articles) | core concerns |
|---|---|---|
| Tool selection | 12,500+ | Electric screwdriver vs hand tools |
| Operation misunderstanding | 8,300+ | Sliding, over-tightening |
| industry standard | 5,700+ | Automotive/aerospace torque requirements |
| DIY tips | 15,200+ | Home repair scene |
2. Three core steps for tightening screws
1. Tool matching: select tools according to the scene
•Home use scenario:Recommended Phillips/slotted screwdriver set, torque range 0.5-3N·m
•Industrial scene:A torque wrench is required, car tire screws usually require 90-120N·m
2. Standardized operating procedures
| steps | Operational points | Common mistakes |
|---|---|---|
| 1. Alignment | Align the screws vertically with the screw holes | Sliding teeth due to oblique insertion |
| 2. Preload | First manually screw in 3-5 turns | Direct power tool start |
| 3. Final tightness | Achieve target torque in 2-3 times | Tighten to the limit at once |
3. Precautions for different materials
•Metal parts:Thread glue can be applied to prevent loosening
•Plastic parts:Torque needs to be reduced by more than 50%
•Wood products:It is recommended to pre-drill holes to prevent cracking
3. Analysis of recent hot cases
1.Incident of loose screws in electric vehicle battery pack(Hot search in July): A certain brand’s failure to use anti-loosening gaskets led to a batch recall, highlighting the importance of industrial-grade tightening standards.
2.DIY furniture assembly tutorials go viral: A blogger demonstrates the "Philips screwdriver + rubber band anti-slip" technique, and the single video has been viewed more than 2 million times.
4. Professional advice and tool recommendations
| Application scenarios | Recommended tools | reference price |
|---|---|---|
| Precision electronic repair | Nanqi 22-in-1 screwdriver | ￥150-200 |
| car repair | Donggong torque wrench (10-150N·m) | ￥600-800 |
| family daily life | Bosch GO2 electric screwdriver | ￥199-299 |
5. Safety warning
• Torque tools must be used for screws over 10mm diameter
• The tightening status of important load-bearing components needs to be checked regularly
• Wear protective glasses when operating power tools
Through systematic operation methods and correct tool selection, the reliability and safety of screw fastening can be significantly improved. It is recommended that users establish standardized operating procedures based on specific needs and refer to industry specifications (such as ISO 898-1 bolt strength standard) when necessary.
check the details
check the details
en
